Masonry / Cement
Packaged Cement Products
Portand Lime & Sand Mortar/ Color (Type M, S, N) is a dry preblended mortar mix containing portland cement, hydrated lime, dried masonry sand and color pigment formulated for superior bond, workability and board life.
QUIKRETE® Mortar Mix (No. 1102) is a blend of masonry cement and graded sand , designed to meet ASTM C 270 for Type N Mortar. Just add water. 80 lb. bags.
QUIKRETE® Concrete Mix (No. 1101) is the original 4000 psi average compressive strength blend of portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work. 80lb. bags.
QUIKRETE® Sand/Topping Mix (No. 1103) consists of a uniformly blended mixture of portland cement, commercial grade sands and other approved ingredients. 80 lb. bags.
Lafarge Type M Mortar Cement is recommended for exterior, at or below grade applications such as pavements, walls, and patios. 80 lb. bags.
Lafarge Type 1 Portland Cement is a general-purpose cement suitable for all uses for which the special properties of other types of portland cements are not required. 94 lb bags.
Concrete / Masonry Cleaners, Sealants
ChemMasters Sure-Lock WB (1 gal. or 5 gal.) is a one step sealer and joint sand stabilizer specifically designed for interlocking stone and pavers. Sure-Lock WB is a high-solids, water-based product developed to penetrate deep into joint sand. The Sure-Lock WB formulation tenaciously binds the sand together and to the sides of the paver to lock the paver in place. Sure-Lock WB prevents the erosion of joint sand and reduces growth of weeds while it stabilizes the paver. Sure-Lock WB also forms a tough film on the surface of the paver to protect it from the damaging effects of salt spray, acid rain, dirt, food stains and fertilizers.
ChemMasters Polyseal-A is high solids, V.O.C. compliant, concrete curing and sealing compound. This state-of-the-art proprietary formulation completely resists discoloration from ultraviolet light exposure, creating a glossy membrane which remains clear throughout its service life. Also has a tint system of twelve standard colors.
ChemMasters Crystal Clear-A is premium quality, super high gloss, non-yellowing, curing and sealing compound. Crystal Clear is a state-of-the-art proprietary formulation which creates the highest gloss possible on concrete. Crystal Clear coats concrete with a chemically bonded siliconized acrylic film that deepens the color and enhances the look of pigmented or decorative concrete. Crystal Clear completely resists discoloration from ultraviolet light exposure. It is extremely abrasion resistant and keeps its high gloss finish much longer than standard concrete sealers. Crystal Clear will retard efflorescence while resisting oil, grease and food stains. Crystal Clear eliminates concrete dusting, while protecting concrete against salt and water penetration.
ChemMasters Silencure-A is a solvent-based, pure acrylic copolymer curing and sealing compound for concrete. When applied to fresh concrete, Silencure-A produces a non-yellowing, clear, continuous film, which effectively cures fresh concrete and provides a tough protective acrylic film to the surface. Silencure-A is unique because in addition to being an effective film forming curing and sealing compound, it contains silane. The silane penetrates the fresh concrete and provides long term protection for the concrete after the film has dissipated. Unlike other silane or siloxane treatments, Silencure-A can be applied to fresh concrete to cure to ASTM C-309 standards. Unlike other curing compounds, Silencure-A penetrates into the pores of the concrete and forms a hydrophobic gel that meets the chloride ion restrictions of NCHRP 244 to reduce the penetration of water, salts and deicing chemicals.
ChemMasters Spallguard WB-10 is a penetrating, chemically reactive oligomerous alkylalkoxy siloxane moisture and water repellent for concrete and masonry. Spall Guard WB 10% contains a special beading agent to enhance water resistance and a catalyst to ensure that the optimum chemical reaction necessary for water repellency occurs.
ChemMasters Safe-Cure and Seal is a water emulsion, styrene acrylate copolymer curing and sealing compound with U.V. stabilizers for maximum yellowing resistance. It is V.O.C. Compliant, produces a medium gloss continuous film which protects concrete surfaces from intrusion of water borne contaminants and dirt.
Concrete / Masonry Repair, Bonding Agents, Modifiers
ChemMasters Cretelox is a non-reemulsifiable, acrylic latex bonding agent and admixture. This high performance polymer is formulated as a bonding agent for cementitious mortars and topping and as an admixture to site mixed or prepackaged cement based mortars.
ChemMasters Chempatch V01 represents a breakthrough in cementitious repair technology. It is a one component, polymer modified, fast setting, nonshrink repair mortar. ChemPatch VO1 is a proprietary structural repair compound unique for its light concrete color and finishing characteristics. With its high ultimate strength, density and durability, ChemPatch VO1 is the ideal option for virtually permanent structural and cosmetic repairs. 50 lb. bags.
ChemMasters Chemseal (White and Foundation Gray) is a portland cement based waterproof coating for concrete and masonry. Three separate formulas of ChemSeal are available to meet the varying requirements of waterproofing, repairing and decorating interior or exterior surfaces, above or below grade. ChemSeal fills and seals the pores and voids in the surface imparting strength and durability as well as a uniform appearance. ChemSeal allows moisture to evaporate, preventing vapor buildup which causes blistering and peeling. 50 lbs. bags.
Chemplug is a fast-setting, expansive hydraulic cement and is compounded to withstand continual exposure to water, even under pressure. It is cement based, fills and seals the pores and voids of the concrete or masonry surface.
QUIKRETE® Vinyl Concrete Patcher (No. 1133) is a multi-purpose concrete repair material with strong adhesive properties. Trowels to a feather edge of 1/16" (1.6 mm). Made of a special blend of exterior grade vinyl resin, fine sand, and portland cement. Just add water. Available in gray and white. 10 lb. buckets.
Masonry Products / Accessories
- Hollow Block in 4”, 6”, 8”, and 12”
- Solid Block in 1”, 2”, 3”, 4”, 6”, and 8”
- Haydite Sewer Brick
- Jumbo Sewer Brick
- Fireplace Flues in 4x8, 8x8, 8x12, and 12x12
- Wall Ties
- Anchor Bolts
- Aluminum Block Vents
- Cast Iron Cleanout Doors in 8x8 and 8x12
- Cast Iron Slop Sink
- Angle Iron in 42”, 48” and 60”
- Tie Wire
Concrete Products / Accessories
- Boss Concrete Boots
- Expansion Joints
- Backer Rods
- Wire Mesh
- Plastic Sheetings
- Euco Caulk Regular
- Euco Caulk Self Leveling